- Download Center
- User Manual
- Software
- NVR/XVR Datasheet
- IP Camera Datasheet
- Catalog
- NVR KIT Datashhet
Wire-Free Rechargeable Battery Powered Security Camera
>4-megapixel Image Quality >Battery life is up 6 months under 20 times of 10s video record per day) >VicoHome Mobile APP, Supports iOS and Android APP online firmware upgrade, >Two-way Audio, live communication. >Fast and easy wire-free setup, built-in voice that how to set up your camera. >Waterproof and Dustproof design. >Color Night Vision. >Mount and adjust the camera easlily with magnetic mount. >Built-in smart siren to trigger remotely. >2.4G Wi-Fi supported (IEEE802.11b/g/n) >AWS cloud storage, micro-SD card (up to 128GB) storage >Advanced AI recognition, receive alerts when people, vehicles, pets or packages appear in your camera's view. >Activity Zones. Create custom activity zones to alert you to motion in only the areas that matter.
| Master Processor | SOC | A dominant frequency of 900 MHz |
| DDR | 512M | |
| Image Sensor | Sensor | 1/3" color CMOS Sensor |
| Lens | M12, f: 2.8mm, F2.0, 2-megapixel | |
| Visual Angle | H (horizontal) 95 degrees; V (vertical) 55 degrees; D (diagonal) 110 degrees | |
| Minimum Illumination | 0.01 Lux | |
| Audio | Input/Output | Two-way voice intercom available (built-in microphone and speaker) |
| Audio Compressing Method | AAC | |
| Video | Video Compressing Method | H.265 |
| Lighting Frequency | 50Hz, 60Hz | |
| Image Frame Rate | 15 fps | |
| Maximum Image Resolution | 1920*1080P | |
| Light Source for Night Vision | Mid-power infrared lamp (850nM in wavelength) / dual-source white-light source with an irradiation distance of 7m | |
| Network | Wireless Network | 2.4G Wi-Fi (IEEE802.11b/g/n), built-in antenna |
| Protocols Supported | TCP/IP, UDP/IP, DHCP, RTMP, MUTP | |
| IP Address Supported | Dynamic IP address supported | |
| AI | Intelligent Features | Human contour detection, activity zone,intelligent push, pet snapshot |
| Alarm Methods | Alarm Notification | Alarm push by mobile APP,white light flashing and alarm sound |
| Wake-up | Wake-up Method | PIR body induction wake-up, and remote positive wake-up |
| Video Recording | Recording Method | Alarm triggered recording, and manual recording |
| Video Storage | Cloud storage, local MICRO SD card, and mobile phone memory | |
| Indicator Lamps | LED Indicator | RGB tri-color lamp indicating the status of power/network signal/functionality |
| Battery | Capacity | 5200mAh/6700mAh |
| Removability | Unremovable | |
| Battery Life | 6 months (provided that 20 10s videos are recorded per day) | |
| Charging Voltage | DV 5V+-5%/1.5A | |
| Charge Time | Within 8 hours | |
| Protection Method | IP65 resistance to dust and water; over-current/over-discharge/over-charge/short circuit/charging protection at high & low temperatures | |
| Power Consumption | Standby Power Consumption | 2.4mW (3.8V 0.63mA) |
| Power Consumption of Daytime Operation | 1W (3.8V 264mA) | |
| Power Consumption of Operation at Night | 2.23W (3.8V 588mA) | |
| Interfaces | Power Supply | 1 MICRO USB interface |
| SD Card | 1 MICRO SD card (up to 128GB supported) | |
| Keys | 1 reset key and 1 on/off key | |
| Installation Method | Installation Method | Magnet and 1/4 universal screw holes |
| Environment | Dustproof and Waterproof | IP65 |
| Operating Environment | -10°~45°C / 0%~80% (no condensation) | |
| Storage Environment | -20°C~60° / 0%~90% (no condensation) | |
| General | Size (LxWxH) | 84mm*62mm*92.5mm (with bracket excluded) |
| Net Weight of Bare Machine | Approx. 338g | |
| Finished Weight | Approx. 570g | |
| Material + Process | ABS + PC | |
| Color | White with high gloss | |
| Certifications | Certificate | RoHS,CE,FCC,WEEE,MSDS,UN38.3 |
Packing
list
1. Camera *1
2. Bracket *1
3. Mounting kit *1
4.
USB charging cable *1
5.
3M Adhesive tape *1
6.
Operation Instruction *1
